Gas Stove/Oven Stamping Die

gas cooker stamping die

  Die Specifications:   Part Material: AISI 430; Thickness of material: 0.5mm;…
Die Specifications: Part Material: SUS430; Thickness of material: 0.5mm; Die type: stage…
Part Name: gas range top plate;Stage Number: 5;Part Surface: with film when punching;Range…
Part Name: gas cooker top plate; Die exported to: Iran; Hiparter specializes…
Part Name: gas stove control panel; Die exported to: Egypt; We have…
Hiparter specializes in  kinds of gas stove metal die. 1) Part material:DC01,…
barbecue oven back cover 1) mold type:stage stamping mold 2) mold life:300,000…
five burners kitchen stove 1) rich experience on home appliance dies 2)…
gas oven mould 1) mould fabrication with rich experience 2) mould type:…
Three Burners Gas cooking top plate, with strengthen beams. Corners formed by…
Stove metal panel with edge bending, side piercing, central rib pressing. made…
60*90 gas cooker working plate stamping moulds part material:stainless steel 301. More…
Gas stove classic working table, 60*90 cm, stainless steel, exported to Indonesia.…
Gas cooker button control panel, rich experience and skilled technologies in metal…
50*60cm gas cooking plate, mult- stages moulds, die core steel SKD11, including…
<< Start < Prev 1 2 Next > End >>
Page 1 of 2

Find What You Want

Deep Drawing Dies

Latest Home Appliance Dies

  • Metal Part of Rice cooker
    Metal Part of Rice cooker Higrade has rich experience in stamping metal parts of rice cooker. Our metal rice cooker parts were exported to many…
    Read 4611 times
  • Air Conditioner Bottom Plate
    Air Conditioner Bottom Plate   Air conditioner back cover manufacturer--Hiparter. 1. Parts material: ST02Z with thickness 1.0mm 2. Mold type: Stage stamping mold 3.…
    Read 4973 times
  • Rice Cooker Inner Pot
    Rice Cooker Inner Pot Alomost 13 years' experience in Rice Cooker Inner Pot. Quality certificated: ISO9001:2008 Die Specifications: 1. Product name: Rice cooker inner…
    Read 5512 times
  • Washing Machine Steel Drum
    Washing Machine Steel Drum We make the stamping dies for washing steel drum. Drum Material: SUS430; Thickness of the Material:0.4mm Stage: 2 Stages 1) Trimming &Piercing…
    Read 6198 times
| + - | RTL - LTR