Air Conditioner Motor Base

Specialized in making stamping dies and stamping parts for air conditioner since 2003.

We have made dies and parts for air conditioner out door, including air conditioner motor base, air conditioner stand base, service back, top panel, bottom panel and so on.

1) Part material: ST02Z

2) Thickness for the material: 1.0mm

3) Mold machining: 6 steps, cutting & piercing, bending, hole-flanging and so on

4) Die type: Single stage stamping dies

5) Die material:Cr12Mov, Cr12

 

Find What You Want

Deep Drawing Dies

Latest Home Appliance Dies

  • Refrigerator Stamping Die
    Refrigerator Stamping Die Part Name: Refrigerator Door Stamping Die; Part Material: PCM; Hiparter specializes in Refrigerator stamping dies for more than 12 years, include refrigerator…
    Read 6543 times
  • Gas Stove Metal Panel
    Gas Stove Metal Panel Stove metal panel with edge bending, side piercing, central rib pressing. made by professional stamping die manufacturer. die material:SKD11, Cr12mov…
    Read 3951 times
  • Microwave Stove Door Panel
    Microwave Stove Door Panel 1) Part material: ST14; 2) Material Thickness:0.5mm; 3) Die life:500,000 shots; 4) Punch of standard: PUNCH; 5) Die Type: Stage;…
    Read 3978 times
  • Metal Moulds for Micro Wave Oven
    Metal Moulds for Micro Wave Oven metal moulds for micro wave oven 1) rich experience on metal stamping moulds 2) making many kinds of home appliance…
    Read 3727 times
| + - | RTL - LTR