Air Conditioner Motor Base

Specialized in making stamping dies and stamping parts for air conditioner since 2003.

We have made dies and parts for air conditioner out door, including air conditioner motor base, air conditioner stand base, service back, top panel, bottom panel and so on.

1) Part material: ST02Z

2) Thickness for the material: 1.0mm

3) Mold machining: 6 steps, cutting & piercing, bending, hole-flanging and so on

4) Die type: Single stage stamping dies

5) Die material:Cr12Mov, Cr12

 

Find What You Want

Deep Drawing Dies

Latest Home Appliance Dies

  • Gas Range Stamping Tool
    Gas Range Stamping Tool Part Name: gas range top plate;Stage Number: 5;Part Surface: with film when punching;Range Type: 5 burners. Hiparter specializes in gas range…
    Read 10419 times
  • High End Washer Front Panel Punching Tool with Surface Treatment
    High End Washer Front Panel Punching Tool with Surface Treatment 1)Tool type: Stage Punching Tool 2)Product Material: Cold steel, Galvanized steel, Stainless steel, etc. 3)Die material: SKH-9, DC53, SKD11, Cr12Mov,…
    Read 2949 times
  • Gas Cooking Burner Top Plate
    Gas Cooking Burner Top Plate Three Burners Gas cooking top plate, with strengthen beams. Corners formed by drawing moulds. Perfect outer surface after moulds stamped.…
    Read 6513 times
  • Washing Machine Door Flange
    Washing Machine Door Flange Washing Machine Door Flange 1) drawing, piercing in thick material, pressing rib position. 2) product material: SUS430 3) Making various…
    Read 7447 times
| + - | RTL - LTR