Water Heater Stamping Die
Sunday, 17 November 2013 10:17

Auto Bracket Progressive Die

1) Die Material: SKD11,Cr12mov; 

2) Cavity:1

3) Die type:progressive die

4) Thickness of material: 4.5mm

auto bracket progressive die strip

Find What You Want

Deep Drawing Dies

Latest Home Appliance Dies

  • water heater stamping parts
     water heater stamping parts Rich experience in making water heater stamping dies and water heater stamping parts. Have made kinds of stamping dies for…
    Read 8080 times
  • Gas Range Stamping Tool
    Gas Range Stamping Tool Part Name: gas range top plate;Stage Number: 5;Part Surface: with film when punching;Range Type: 5 burners. Hiparter specializes in gas range…
    Read 11354 times
  • Barbecue Oven Back Cover
    Barbecue Oven Back Cover barbecue oven back cover 1) mold type:stage stamping mold 2) mold life:300,000 shots 3) mold material:SKD11,CR12MOV, SCM and so on
    Read 7087 times
  • Gas Cooking Burner Top Plate
    Gas Cooking Burner Top Plate Three Burners Gas cooking top plate, with strengthen beams. Corners formed by drawing moulds. Perfect outer surface after moulds stamped.…
    Read 7549 times
| + - | RTL - LTR